Disc and drum mowers and mower-conditioners – Direct-cut headers
The mechanical bar suspension allows the cutting unit a wide rearward and upward range of movement without shifting the machine’s center of gravity.
The active supporting frame and oscillating arms guide the cutter bar perfectly over any unevenness of the terrain. This unit reacts immediately: the cutter bar lifts when encountering bumps, then lowers again as it moves down over them.
A double universal joint ensures a torsion-free connection between the angle gearbox and the cutter bar.
High-performance cutting unit, designed with a compact, wedge-shaped profile to offer a wide range of adjustment options and allow the best penetration into the most difficult forage crops.
Round discs for a smaller impact surface, a clean cut, and longer blade life.
Quick blade change system for fast replacement using the dedicated key, minimizing time losses and increasing productivity.
Consisting of two scrapers made of hardened wear-resistant material for constant cleaning of the lower part of the disc.
The accessory can also be installed after purchasing a MARANGON cutter bar, as the disc is prepared for aftermarket installation as well.
Available for all Marangon disc mowers and mower-conditioners.
| Front-mounted “Sprint” mower | SPRINT 245 | SPRINT 285 | SPRINT 320 |
|---|---|---|---|
| Cutting Width | 245 | 285 | 320 |
| Number of Knives | 12 | 14 | 16 |
| Number of Discs | 6 | 7 | 8 |
| Power Take-Off Speed | 1000 sx as standard / 540dx on request | 1000 sx as standard / 540dx on request | 1000 sx as standard / 540dx on request |
| Air Conditioner | RUBBER ROLLERS or NYLON/IRON BEADERS | RUBBER ROLLERS or NYLON/IRON BEADERS | RUBBER ROLLERS or NYLON/IRON BEADERS |
| Power Requirement (cv/kW) | 65/48 | 75/56 | 80/59 |
| Power Requirement for RCG (Rubber Rollers) cv/Kw | 75/56 | 82/62 | 95/71 |
| RCF Power Requirement (with Nylon Whips) cv/Kw | 70/53 | 80/60 | 90/65 |
| RCS Power Requirement (Iron Flagelli Condition) cv/Kw | 75/56 | 82/62 | 95/71 |
| Weight in kg | 620 | 690 | 760 |
| RCG Weight (with rubber rollers) in kg | 970 | 1120 | 1180 |
| RCF Weight (with Nylon Flagelli) in kg | 910 | 1040 | 1080 |
| RCS Weight (Iron Flagelli Condition) in kg | 970 | 1120 | 1180 |
| Front-mounted “Sprint” mower | SPRINT 245 | SPRINT 285 | SPRINT 320 |
|---|---|---|---|
| Cutting Width | 245 | 285 | 320 |
| Number of Knives | 12 | 14 | 16 |
| Number of Discs | 6 | 7 | 8 |
| Power Take-Off Speed | 1000 sx as standard / 540dx on request | 1000 sx as standard / 540dx on request | 1000 sx as standard / 540dx on request |
| Air Conditioner | RUBBER ROLLERS or NYLON/IRON BEADERS | RUBBER ROLLERS or NYLON/IRON BEADERS | RUBBER ROLLERS or NYLON/IRON BEADERS |
| Power Requirement (cv/kW) | 65/48 | 75/56 | 80/59 |
| Power Requirement for RCG (Rubber Rollers) cv/Kw | 75/56 | 82/62 | 95/71 |
| RCF Power Requirement (with Nylon Whips) cv/Kw | 70/53 | 80/60 | 90/65 |
| RCS Power Requirement (Iron Flagelli Condition) cv/Kw | 75/56 | 82/62 | 95/71 |
| Weight in kg | 620 | 690 | 760 |
| RCG Weight (with rubber rollers) in kg | 970 | 1120 | 1180 |
| RCF Weight (with Nylon Flagelli) in kg | 910 | 1040 | 1080 |
| RCS Weight (Iron Flagelli Condition) in kg | 970 | 1120 | 1180 |
The mechanical bar suspension uses an innovative and exclusive Marangon patented cam system, designed to redefine field safety standards. This sophisticated construction geometry allows the cutting unit a wide and smooth range of movement both rearward and upward in the event of obstacles, protecting the integrity of the mower without altering or shifting the machine’s center of gravity. The result is constant operating stability, immediate responsiveness to ground hazards, and a drastic reduction in structural stress on the tractor lift.
Marangon front-mounted mowers with “Pull” trailed kinematics are designed to deliver maximum performance on the most uneven, rolling, or hilly terrain. This system stands out for its extraordinary freedom of movement and wide range of travel, allowing the bar to move smoothly both rearward and upward. The combined action of the active supporting frame and oscillating arms guides the cutter bar with millimetric precision over any hollow, ensuring immediate responsiveness: the cutting unit lifts instantly when encountering bumps and faithfully follows the ground profile as it moves downward. By performing an almost vertical movement, the system minimizes PTO shaft sliding and dynamic loads on the transmission, resulting in a drastic reduction in wear and impeccable cutting consistency.
The exclusive Pull-type attachment ensures perfect three-dimensional adaptation to the terrain, offering wide movement ranges even on the most uneven surfaces. Thanks to the integration of spherical joints in the oscillating arms of the bar, the system guarantees exceptional transverse oscillation of +/- 16°. This extraordinary flexibility allows the mower to faithfully follow lateral profiles and ground slopes, keeping the bar always parallel to the terrain for a uniform cut and total protection of the grass sward.
Our mowers stand out on the market for their extraordinary smooth running and extremely regular travel. Dynamic drive is provided directly from the first mowing disc, optimizing power flow. A double universal joint ensures a robust, completely torsion-free connection between the angle gearbox and the cutter bar, minimizing vibrations. In addition, to protect the entire kinematics of both tractor and machine, a safety freewheel is integrated as standard into the drive system of all models.
The high-performance “Razor Cut” cutting unit has been deliberately designed with a compact, wedge-shaped profile to offer a wide range of cutting-height adjustment options and guarantee the best penetration even into the densest, lodged, or most difficult forage crops, always ensuring optimal and clean mowing. Thanks to the opposed rotation configuration, in which the cutting discs rotate toward each other in pairs, the bar distributes the crop evenly, spread out and widened on the ground, promoting optimal forage aeration and drastically accelerating wilting times in the field.
The round-profile design has been engineered to minimize the impact surface against any foreign objects, ensuring superior shock dispersion and preserving the mechanical integrity of the entire cutting unit. This exclusive geometry results in lower tractor power absorption and extremely high quality of the cut crop. The 129 mm blades ensure perfect overlap and significantly longer service life: thanks to the dynamic flow, once mowing has been completed, the blades do not work for the full rotation of the disc but retract into protection under the adjacent disc. This feature prevents a second and unnecessary processing of the forage, which therefore remains intact and free from quality losses. In addition, to optimize maintenance costs and extend the life cycle of the bar, the discs are designed to be easily interchangeable once worn.
To minimize downtime and maximize productivity in the field, the exclusive quick-change system allows the blades to be replaced in just a few moments using the dedicated key. The unit is integrated with two scrapers made of hardened wear-resistant material, designed to ensure constant cleaning of the lower part of the disc and prevent residue build-up. Designed with maximum flexibility in mind, this system can also be installed at a later stage after purchasing the machine, as every disc of the Marangon cutter bar is already prepared as standard for aftermarket installation. The accessory is available for the entire range of Marangon disc mowers and mower-conditioners.
Designed to eliminate the risks caused by accidental impacts in the field, the “Safe Cut” protection system, available on request, guarantees maximum operating safety and a drastic reduction in repair costs. In the event of a violent impact against foreign objects, the mechanism preserves the integrity of the bar by protecting the transmission components, which remain fully protected and free from wear. The system is reactivated simply and immediately through the quick replacement of the dedicated pins, an operation that requires minimal time and negligible costs. With “Safe Cut”, Marangon offers haymaking professionals a unique solution for comfort and reliability, turning potential structural damage into quick and economical routine maintenance.
The mechanical bar suspension uses an innovative and exclusive Marangon patented cam system, designed to redefine field safety standards. This sophisticated construction geometry allows the cutting unit a wide and smooth range of movement both rearward and upward in the event of obstacles, protecting the integrity of the mower without altering or shifting the machine’s center of gravity. The result is constant operating stability, immediate responsiveness to ground hazards, and a drastic reduction in structural stress on the tractor lift.
Marangon front-mounted mowers with “Pull” trailed kinematics are designed to deliver maximum performance on the most uneven, rolling, or hilly terrain. This system stands out for its extraordinary freedom of movement and wide range of travel, allowing the bar to move smoothly both rearward and upward. The combined action of the active supporting frame and oscillating arms guides the cutter bar with millimetric precision over any hollow, ensuring immediate responsiveness: the cutting unit lifts instantly when encountering bumps and faithfully follows the ground profile as it moves downward. By performing an almost vertical movement, the system minimizes PTO shaft sliding and dynamic loads on the transmission, resulting in a drastic reduction in wear and impeccable cutting consistency.
The exclusive Pull-type attachment ensures perfect three-dimensional adaptation to the terrain, offering wide movement ranges even on the most uneven surfaces. Thanks to the integration of spherical joints in the oscillating arms of the bar, the system guarantees exceptional transverse oscillation of +/- 16°. This extraordinary flexibility allows the mower to faithfully follow lateral profiles and ground slopes, keeping the bar always parallel to the terrain for a uniform cut and total protection of the grass sward.
Our mowers stand out on the market for their extraordinary smooth running and extremely regular travel. Dynamic drive is provided directly from the first mowing disc, optimizing power flow. A double universal joint ensures a robust, completely torsion-free connection between the angle gearbox and the cutter bar, minimizing vibrations. In addition, to protect the entire kinematics of both tractor and machine, a safety freewheel is integrated as standard into the drive system of all models.
The high-performance “Razor Cut” cutting unit has been deliberately designed with a compact, wedge-shaped profile to offer a wide range of cutting-height adjustment options and guarantee the best penetration even into the densest, lodged, or most difficult forage crops, always ensuring optimal and clean mowing. Thanks to the opposed rotation configuration, in which the cutting discs rotate toward each other in pairs, the bar distributes the crop evenly, spread out and widened on the ground, promoting optimal forage aeration and drastically accelerating wilting times in the field.
The round-profile design has been engineered to minimize the impact surface against any foreign objects, ensuring superior shock dispersion and preserving the mechanical integrity of the entire cutting unit. This exclusive geometry results in lower tractor power absorption and extremely high quality of the cut crop. The 129 mm blades ensure perfect overlap and significantly longer service life: thanks to the dynamic flow, once mowing has been completed, the blades do not work for the full rotation of the disc but retract into protection under the adjacent disc. This feature prevents a second and unnecessary processing of the forage, which therefore remains intact and free from quality losses. In addition, to optimize maintenance costs and extend the life cycle of the bar, the discs are designed to be easily interchangeable once worn.
To minimize downtime and maximize productivity in the field, the exclusive quick-change system allows the blades to be replaced in just a few moments using the dedicated key. The unit is integrated with two scrapers made of hardened wear-resistant material, designed to ensure constant cleaning of the lower part of the disc and prevent residue build-up. Designed with maximum flexibility in mind, this system can also be installed at a later stage after purchasing the machine, as every disc of the Marangon cutter bar is already prepared as standard for aftermarket installation. The accessory is available for the entire range of Marangon disc mowers and mower-conditioners.
Designed to eliminate the risks caused by accidental impacts in the field, the “Safe Cut” protection system, available on request, guarantees maximum operating safety and a drastic reduction in repair costs. In the event of a violent impact against foreign objects, the mechanism preserves the integrity of the bar by protecting the transmission components, which remain fully protected and free from wear. The system is reactivated simply and immediately through the quick replacement of the dedicated pins, an operation that requires minimal time and negligible costs. With “Safe Cut”, Marangon offers haymaking professionals a unique solution for comfort and reliability, turning potential structural damage into quick and economical routine maintenance.
Would you like to receive a quote or some general information?
“RAZOR CUT” CUTTING UNIT: QUALITY MADE BY MARANGON The high-performance cutting unit, deliberately designed with a compact, wedge-shaped profile to offer a wide range of cutting-height adjustment options and allow the best penetration into the most difficult forage crops, always ensuring an optimal and clean cut.
CLEAN CUT TECHNOLOGY
Stripe-free cutting thanks to the optimal overlap of the blade trajectories.
“FIRST AID KIT” MAIN SUPPORT
The main support assembly, consisting of a single block fixed with six screws, allows quick, individual, and simple inspection of the gearbox.
COVER WITH INTEGRATED “C” REINFORCEMENT The thick cover with integrated “C” reinforcement, unique in its kind, eliminates flexing of the cutting unit in order to prevent twisting of the moving components.
ROUND DISC
WEAR PLATES
The cutting unit is equipped as standard with a series of wear-resistant boron steel skids, designed to provide the gear housing with maximum protection against any risk of damage in the field. The rounded reinforcements positioned between the skids protect the bar effectively, while the profiling on the underside prevents material build-up, allowing the mown crop to flow without interruption.
ADDITIONAL WEAR PLATES
The additional wear plate kit can be fitted directly at the factory on request, or it can be installed easily and quickly by the user at a later stage, aftermarket, after purchasing the MARANGON mower. Stamped and made of wear-resistant boron steel, these elements provide additional protection for the cutting unit.
“TOPPING SKIDS”
Raising plate that allows the cutting height to be increased in order to perform so-called “Topping”, cutting only the upper part of the plant. This operation stops the apical growth of the crop, stimulating the development of the lower part; livestock entering the pasture afterwards will therefore find a much richer and more nutritious crop.
QUICK BLADE CHANGE
Quick-change system for fast blade replacement using the dedicated key, specifically designed to minimize downtime in the field and increase hourly productivity.
Available for all Marangon disc mowers and mower-conditioners.
LOWER DISC SCRAPERS
Module consisting of two scrapers made of hardened wear-resistant material that ensure constant cleaning of the lower part of the disc. The accessory can also be installed after purchasing a MARANGON cutter bar, as the disc is already natively prepared for aftermarket installation.
Available for all Marangon disc mowers and mower-conditioners.
“SAFE CUT” DISC SAFETY SYSTEM
Users know this well: accidental impacts against foreign objects and stones can cause serious damage and high repair costs. With the “SAFE CUT” system, we offer maximum protection at reduced costs. Protection of the cutting discs against impacts, available on request, is a unique solution on the market for operational safety and comfort.
