Falciatrici e Falcia-condizionatrici a dischi e tamburi - Testate taglio diretto

Via Valsugana, 11/B

35010 - San Giorgio in Bosco Padova - Italy

Front mower SPRINT

Front mower SPRINT

marangon-falciatrice-frontale-sprint-00
Front mower coupled to the tractor through the tractor front linkage.

Front or rear mounted mower with 3-point attachment on the tractor or by fast-coupling triangle of second category.

The cutting adjustment is done by the third point of the tractor which allows to vary the angle of the mowing unit

The front attachment allows the mower to follow the course of the ground with extreme precision and to overcome without difficulty, eliminating the risk of damaging the mowing unit.

Primary transmission is carried out by oil bath multiplier, while the secondary transmission is thorugh oil bath gears. The mower has a patented MARANGON self-leveling suspension system. The parallelogram-shaped double spring suspension allows an optimal calibration of the weight of the mower in way to always ensure uniform ground pressure for a clean and precise cut without any damage to the grassy cot and a larger excursion of the mowing unit in case of impact with possible obstacles in the field.

Mower available in the version with rubber roller conditioner, nylon finger, steel finger conditioner for a considerable time saving and lower risk of exposure to climate hazards of the crop..

SPRINT model available in the measures in mt: 2.45;2.85;3.20

FRONT DISC MOWER SPRINT 245 SPRINT 285 SPRINT 320
Cutting width in cm 245 285 320
Number of blades 12 14 16
Number of discs 6 7 8
PTO rpm 1000 sx standard / 540dx on request
Conditioner ROLLER or NYLON/IRON FINGER
Power required cv/Kw 65/48 75/56 80/59
Power required RCG (cond. Rubber Roller) cv/Kw 75/56 82/62 95/71
Power required RCF (cond. Nylon Finger) cv/Kw 70/53 80/60 90/65
Power required RCFS (cond. Iron Finger) cv/Kw 75/56 82/62 95/71
Weight in Kg 620 690 760
Weight RCG (cond. Rubber Roller) in Kg 970 1120 1180
Weight RCF (cond. Nylon Finger) in Kg 910 1040 1080
Weight RCFS (cond. Iron Finger) in Kg 970 1120 1180

HIGH PERFORMANCE CUTTER BAR

The cutter bar, deliberately designed, very compact, with a C-profile reinforcement embedded in the cover, allows total stiffness without bending and perfect penetration in all types of crops.

MAIN HUB

The the main support consists in a single block secured with six screws and allows a quick, individual and simple examination of the gearbox without opening the cover. The bearings are mounted with great pitch clearance to cancel the transverse forces of the pinion shaft.

Supporto principale
Gruppo falciante

COVER

The heavy duty cover, with integrated C reinforcement, avoids the bending of the cutting unit in order to avoid the twisting of moving parts. Anti-wear skids at the bottom of the cutter bar are made of a special anti-wearing steel and have a wedge-shaped angular profile for penetration into high-density crops and avoid frontal clogs. The application of additional shoes offer a higher protection of the bottom of the cutter bar when working in particularly abrasive soils.

Punti di ispezione

ROUND DISCS

Marangon’s round cutting disks provide greater safety than the oval disk in case of shock shock, avoiding damage to the vital parts of the mower and repeated cutting of the product as the knife disappears under the disk. Hot forged, tempered, bent and ribbed, allow the acceleration of the flow in way to facilitate the discharge of the product. Knives are made of high quality steel for a long life .

Advantages of the round disc

  • Cleaner cut
  • Less impact surface
  • Higher shock absorption thanks to the round shape of the disc
  • Preserves the mechanic of the whole cutting group.
  • High cutting quality
  • No mulch effect
  • Higher duration of the knives
  • 129 mm knives
  • Less power absorption
  • Possibility to interchange discs once worn
Disco
Vantaggi del disco rotondo

FRONT MOUNTED HITCH

The front mounted hitch allows the mower to follow the shape of the terrain with extreme precision and to overcome without difficulty ‘bumps and dives. An excellent fit to the ground and easy overcoming of improper obstacles cancels the risk of damaging the mowing bar.

Regualr cut and easy passahe of bumps
Higher cutting speed
Icreased productivity
Less power required
Less cutter bar wear

marangon-falciatrice-frontale-sprint-01

DIRECT TRANSMISSION

Less use of moving parts, robust power transmission, reduced energy consumption and reduced transport width thanks to direct transmission.

Trasmissione

SPRING SUSPENSION

The SPRINT mowers feature a self-leveling suspension, the double spring suspension allows the optimal calibration of the weight of the mower so as to maintain an even ground pressure and always guarantees a clean cut and no damage to the grassy surface.

marangon-falciatrice-frontale-sprint-03

STANDARD QUICK FITTING

The tractor attachment comes with standard female fastening system, with removable second category application, to ensure maximum flexibility of use. Cardan with free wheel and standard clutch.

marangon-falciatrice-frontale-sprint-04

DOUBLE DRIVE RUBBER ROLLER CONDITIONER RCG

The “chevrons” rubber drive roller conditioner is suitable for conditioning crops such as clover, herb and legume which require gentle and progressive treatment by affecting the entire length of the stem without flattening it to maintain the nutritional value of the leaf

The intensity of the conditioning is quickly adjustable by the opening of the rollers which are mounted on springs that allow automatic opening even when encountering a foreign body. The transmission of the two rollers always guarantees syncronis.

RCG
Trasmissione condizionatore

FINGER CONDITIONER RCF

The conditioner unit is equipped with a nylon finger rotor that provides great resistance to bending and impacts. The V shape and helix arrangement of the teeth ensure smooth and effective conditioning over the entire length of the cut. The conditioner is driven by four trapezoidal belts, adjustable with an automatic belt tensioner. The intensity of the conditioning can be adjusted quickly through a multi-position lever that allows the approach of a striped sheet.
Conditioning is effective and regular, and the stem is punctured throughout its length.
Nylon teeth are perfectly suited for large-width mowers, ensuring lightness and ease of handling.

marangon-falciatrici-condizionatore-a-flagelli-01
marangon-falciatrici-condizionatore-a-flagelli-02

FINGER CONDITIONER RCFS

The conditioner unit is equipped with a mobile iron finger rotor that provides great resistance to bending and impacts. The V shape and helix arrangement of the teeth ensure smooth and effective conditioning over the entire length of the cut. The conditioner is driven by four trapezoidal belts, adjustable with an automatic belt tensioner. The intensity of the conditioning can be adjusted quickly through a multi-position lever that allows the approach of a striped sheet.
Conditioning is effective and regular, and the stem is punctured throughout its length.

Quick knives change system for a faster knives change with the appropriate key.

Composed of two anti-wear and hardened scrapers for a constant cleaning of the bottom of the disc

The accessory can also be installed after the purchase of a MARANGON mowing bar as the disk is ready for its after-market installation.

Available for all Marangon disc mowers and mower conditioners

Cambio rapido coltelli
Cambio rapido coltelli

ANTIWEAR SKIDS 14mm

The anti-wear kit can be mounted on request directly on the mower or can be installed easily and quickly by the user even after purchasing a MARANGON mower.
Stamped, made of wear-resistant and hardened material, provide additional protection to the cutting unit.

Piastra anti usura
Piastra anti usura
Piastra anti usura